|
|
Home  Linux and 3G Forum
|
|
PHARscape
3G Datacards and Linux
|
| View previous topic :: View next topic |
| Author |
Message |
***BESTIA***
Joined: 18 Feb 2008
Posts: 1
|
 Posted: Mon Feb 18, 2008 3:50 pm Post subject: GlobeTrotter Express 7.2 Data Card >>PCMCIA |
 |
|
Speak very bad english.
Hello. Posiadam taki problem z tym modemem podlaczony po przez PCMCIA>> | Code: | | http://www.option.com/products/globetrotter_express_72.shtml |
. Probowalem przez icon_switch.c oto logi:
| Code: | demon@demon-laptop:~$ cd /home/demon/aplikacje/
demon@demon-laptop:~/aplikacje$ cc -lusb -o icon_switch icon_switch.c
demon@demon-laptop:~/aplikacje$ sudo cp icon_switch /usr/local/sbin
demon@demon-laptop:~/aplikacje$ cd /usr/local/sbin/
demon@demon-laptop:/usr/local/sbin$ icon_switch
* icon_switch: tool for changing USB mode of Option Icon 3G+ box
* (C) Josua Dietze 2006
* Works with libusb 0.1.12 and probably other versions
Looking for Option Icon USB 3G+ box ...
Found box in storage mode. Preparing for switching ...
Looking for active storage driver ...
No driver found. Box was not initialized. Can't communicate. Bye
demon@demon-laptop:/usr/local/sbin$ sudo modprobe usbserial
demon@demon-laptop:/usr/local/sbin$ sudo modprobe option |
| Code: | demon@demon-laptop:~$ lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 05c6:1000 Qualcomm, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 005: ID 04fc:0c15 Sunplus Technology Co., Ltd
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 04fc:0003 Sunplus Technology Co., Ltd CM1092 Optical Scroller Mouse
Bus 001 Device 001: ID 0000:0000 |
| Code: | demon@demon-laptop:~$ lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE)
06:05.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 Generic system peripheral [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
07:00.0 USB Controller: Philips Semiconductors USB 1.1 Host Controller (rev 11)
07:00.2 USB Controller: Philips Semiconductors USB 2.0 Host Controller (rev 11) |
| Code: | dmesg
[ 33.384874] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 33.384885] Compat vDSO mapped to ffffe000.
[ 33.384895] CPU: AMD Mobile AMD Sempron(tm) Processor 3100+ stepping 02
[ 33.384900] Checking 'hlt' instruction... OK.
[ 33.401240] Early unpacking initramfs... done
[ 33.752922] ACPI: Core revision 20070126
[ 33.752987] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 33.757891] ENABLING IO-APIC IRQs
[ 33.758079] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 33.797747] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 33.797797] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 33.797800] ...trying to set up timer as Virtual Wire IRQ... works.
[ 33.943948] Booting paravirtualized kernel on bare hardware
[ 33.944025] Time: 12:53:31 Date: 01/17/108
[ 33.944046] NET: Registered protocol family 16
[ 33.944118] EISA bus registered
[ 33.944134] ACPI: bus type pci registered
[ 33.956556] PCI: PCI BIOS revision 2.10 entry at 0xfd63c, last bus=6
[ 33.956558] PCI: Using configuration type 1
[ 33.956560] Setting up standard PCI resources
[ 33.957941] ACPI: EC: Look up EC in DSDT
[ 33.958546] ACPI: EC: GPE=0x03, ports=0x66, 0x62
[ 33.983238] ACPI: Interpreter enabled
[ 33.983241] ACPI: (supports S0 S3 S4 S5)
[ 33.983253] ACPI: Using IOAPIC for interrupt routing
[ 33.999904] ACPI: EC: GPE=0x03, ports=0x66, 0x62
[ 33.999938] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 33.999944] PCI: Probing PCI hardware (bus 00)
[ 34.001477] PCI: Transparent bridge - 0000:00:14.4
[ 34.001574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 34.001718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 34.001821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 34.001923] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 34.002027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 34.004775] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 34.004881] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 34.004986] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 34.005089] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 34.005193] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 34.005296] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 34.005399] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 34.005503] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 34.005578] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 34.005588] pnp: PnP ACPI init
[ 34.005595] ACPI: bus type pnp registered
[ 34.013756] pnp: PnP ACPI: found 11 devices
[ 34.013759] ACPI: ACPI bus type pnp unregistered
[ 34.013763] PnPBIOS: Disabled by ACPI PNP
[ 34.013806] PCI: Using ACPI for IRQ routing
[ 34.013809] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 34.013815] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 34.013867] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 34.013914] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 34.013961] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 34.035454] NET: Registered protocol family 8
[ 34.035456] NET: Registered protocol family 20
[ 34.035507] pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 34.035511] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 34.035514] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 34.035521] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 34.035524] pnp: 00:08: ioport range 0x1200-0x120f has been reserved
[ 34.035527] pnp: 00:08: ioport range 0x500-0x51f has been reserved
[ 34.035530] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[ 34.035534] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 34.035537] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[ 34.035540] pnp: 00:09: iomem range 0x0-0xfff could not be reserved
[ 34.035749] Time: tsc clocksource has been installed.
[ 34.065721] PCI: Bridge: 0000:00:02.0
[ 34.065723] IO window: 9000-9fff
[ 34.065726] MEM window: c0100000-c01fffff
[ 34.065729] PREFETCH window: c8000000-cfffffff
[ 34.065732] PCI: Bridge: 0000:00:06.0
[ 34.065734] IO window: disabled.
[ 34.065736] MEM window: disabled.
[ 34.065738] PREFETCH window: disabled.
[ 34.065741] PCI: Bridge: 0000:00:07.0
[ 34.065742] IO window: disabled.
[ 34.065744] MEM window: disabled.
[ 34.065746] PREFETCH window: disabled.
[ 34.065756] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 34.065758] IO window: 0000a400-0000a4ff
[ 34.065764] IO window: 0000a800-0000a8ff
[ 34.065770] PREFETCH window: 50000000-53ffffff
[ 34.065776] MEM window: 58000000-5bffffff
[ 34.065781] PCI: Bridge: 0000:00:14.4
[ 34.065784] IO window: a000-afff
[ 34.065791] MEM window: c0200000-c02fffff
[ 34.065796] PREFETCH window: 50000000-55ffffff
[ 34.065812] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 34.065819] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 34.065825] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 34.065855] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 34.065872] NET: Registered protocol family 2
[ 34.103664] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 34.103793] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 34.104825] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 34.105114] TCP: Hash tables configured (established 131072 bind 65536)
[ 34.105117] TCP reno registered
[ 34.115748] checking if image is initramfs... it is
[ 34.566960] Switched to high resolution mode on CPU 0
[ 34.806046] Freeing initrd memory: 7882k freed
[ 34.806359] audit: initializing netlink socket (disabled)
[ 34.806373] audit(1203252811.356:1): initialized
[ 34.806419] highmem bounce pool size: 64 pages
[ 34.807743] VFS: Disk quotas dquot_6.5.1
[ 34.807755] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 34.807837] io scheduler noop registered
[ 34.807839] io scheduler anticipatory registered
[ 34.807841] io scheduler deadline registered
[ 34.807854] io scheduler cfq registered (default)
[ 34.807863] PCI: MSI quirk detected. MSI deactivated.
[ 35.237877] Boot video device is 0000:01:00.0
[ 35.237955] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 35.237975] assign_interrupt_mode Found MSI capability
[ 35.237978] Allocate Port Service[0000:00:02.0:pcie00]
[ 35.238030] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 35.238049] assign_interrupt_mode Found MSI capability
[ 35.238051] Allocate Port Service[0000:00:06.0:pcie00]
[ 35.238097] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 35.238116] assign_interrupt_mode Found MSI capability
[ 35.238118] Allocate Port Service[0000:00:07.0:pcie00]
[ 35.238212] isapnp: Scanning for PnP cards...
[ 35.592365] isapnp: No Plug & Play device found
[ 35.611413] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 35.611678] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 35.612083] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 35.612092] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 35.612455] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 35.612625] input: Macintosh mouse button emulation as /class/input/input0
[ 35.612681] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 35.612991] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 35.613065] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 35.613069] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 35.613072] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 35.613074] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 35.613077] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 35.613206] mice: PS/2 mouse device common for all mice
[ 35.613494] EISA: Probing bus 0 at eisa.0
[ 35.613504] Cannot allocate resource for EISA slot 1
[ 35.613531] Cannot allocate resource for EISA slot 8
[ 35.613532] EISA: Detected 0 cards.
[ 35.613675] TCP cubic registered
[ 35.613690] NET: Registered protocol family 1
[ 35.613711] Using IPI Shortcut mode
[ 35.613900] Magic number: 12:861:885
[ 35.613969] hash matches device ptyx9
[ 35.613978] hash matches device ptyuc
[ 35.614328] Freeing unused kernel memory: 348k freed
[ 35.661270] input: AT Translated Set 2 keyboard as /class/input/input1
[ 37.153685] fuse init (API version 7.8)
[ 37.158926] Capability LSM initialized
[ 37.266800] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 38.864318] ACPI: Thermal Zone [TZS0] (80 C)
[ 40.461844] ACPI: Thermal Zone [TZS1] (52 C)
[ 41.672353] ACPI: Thermal Zone [TZSV] (58 C)
[ 41.771862] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 51.669408] usbcore: registered new interface driver usbfs
[ 51.669431] usbcore: registered new interface driver hub
[ 51.669452] usbcore: registered new device driver usb
[ 51.670069] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 51.670104] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 51.670117] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 51.670303] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 51.670324] ohci_hcd 0000:00:13.0: irq 18, io mem 0xc0000000
[ 51.728445] usb usb1: configuration #1 chosen from 1 choice
[ 51.728470] hub 1-0:1.0: USB hub found
[ 51.728482] hub 1-0:1.0: 4 ports detected
[ 51.832292] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 51.832311] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 51.832338] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 51.832355] ohci_hcd 0000:00:13.1: irq 18, io mem 0xc0001000
[ 51.892128] usb usb2: configuration #1 chosen from 1 choice
[ 51.892149] hub 2-0:1.0: USB hub found
[ 51.892160] hub 2-0:1.0: 4 ports detected
[ 51.996271] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 51.996287] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 51.996310] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 51.996364] ehci_hcd 0000:00:13.2: irq 18, io mem 0xc0002000
[ 52.135712] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 52.135739] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 52.135880] usb usb3: configuration #1 chosen from 1 choice
[ 52.135904] hub 3-0:1.0: USB hub found
[ 52.135913] hub 3-0:1.0: 8 ports detected
[ 52.455211] SCSI subsystem initialized
[ 52.459658] libata version 2.21 loaded.
[ 52.464889] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 52.464894] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 52.465548] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 52.465569] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
[ 52.465581] ATIIXP: chipset revision 0
[ 52.465583] ATIIXP: not 100% native mode: will probe irqs later
[ 52.465592] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[ 52.465608] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[ 52.465617] Probing IDE interface ide0...
[ 52.690832] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 52.752182] hda: TOSHIBA MK8025GAS, ATA DISK drive
[ 52.826166] usb 3-1: configuration #1 chosen from 1 choice
[ 53.313865] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 53.421716] hda: selected mode 0x45
[ 53.421814] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 53.520379] usb 1-2: configuration #1 chosen from 1 choice
[ 53.660725] Probing IDE interface ide1...
[ 53.917833] usbcore: registered new interface driver libusual
[ 53.921720] Initializing USB Mass Storage driver...
[ 53.921828] scsi0 : SCSI emulation for USB Mass Storage devices
[ 53.921865] usb-storage: device found at 2
[ 53.921867] usb-storage: waiting for device to settle before scanning
[ 53.921881] usbcore: registered new interface driver usb-storage
[ 53.921883] USB Mass Storage support registered.
[ 53.934434] usbcore: registered new interface driver hiddev
[ 53.939817] input: USB OpticalWheel Mouse as /class/input/input2
[ 53.939835] input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:13.0-2
[ 53.939848] usbcore: registered new interface driver usbhid
[ 53.939852] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 54.396618] hdc: PHILIPS DVD+/-RW SDVD8441, ATAPI CD/DVD-ROM drive
[ 55.067167] hdc: selected mode 0x42
[ 55.067783] ide1 at 0x170-0x177,0x376 on irq 15
[ 55.069743] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level, low) -> IRQ 20
[ 55.120469] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 55.126993] hda: max request size: 128KiB
[ 55.127099] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 55.127130] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, low) -> IRQ 22
[ 55.127482] eth0: RTL8169sb/8110sb at 0xf88c4400, 00:0a:e4:f4:c7:60, XID 10000000 IRQ 22
[ 55.137774] hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100)
[ 55.137870] hda: cache flushes supported
[ 55.137918] hda: hda1 hda2 < hda5 hda6 > hda3
[ 55.240723] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 55.240732] Uniform CD-ROM driver Revision: 3.20
[ 57.007899] Attempting manual resume
[ 57.007903] swsusp: Resume From Partition 3:6
[ 57.007905] PM: Checking swsusp image.
[ 57.103987] PM: Resume from disk failed.
[ 57.715092] kjournald starting. Commit interval 5 seconds
[ 57.715102] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.913392] usb-storage: device scan complete
[ 58.917202] scsi 0:0:0:0: Direct-Access FUJITSU MHW2120BH PQ: 0 ANSI: 2
[ 204.233333] device-mapper: multipath: version 1.0.5 loaded
[ 215.585896] Linux agpgart interface v0.102 (c) Dave Jones
[ 215.608309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 215.614350] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 217.118435] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 217.487477] ieee80211_crypt: registered algorithm 'NULL'
[ 217.489479] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 217.489483] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[ 217.731219] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 217.733658] sd 0:0:0:0: [sda] Write Protect is off
[ 217.733661] sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
[ 217.733663] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 217.755150] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 217.757500] sd 0:0:0:0: [sda] Write Protect is off
[ 217.757503] sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
[ 217.757506] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 217.757509] sda:bcm43xx driver
[ 217.763646] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 217.791464] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
[ 217.791494] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 217.791496] Yenta: Routing CardBus interrupts to PCI
[ 217.791502] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
[ 217.840391] sdhci: Secure Digital Host Controller Interface driver
[ 217.840395] sdhci: Copyright(c) Pierre Ossman
[ 218.023568] Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
[ 218.023574] Socket status: 30000820
[ 218.023577] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08
[ 218.023584] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 218.023601] cs: IO port probe 0xa000-0xafff: clean.
[ 218.023830] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 218.023833] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff
[ 218.024155] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 20 (level, low) -> IRQ 16
[ 218.024227] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 218.024248] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level, low) -> IRQ 16
[ 218.024303] mmc0: SDHCI at 0xc0209000 irq 16 DMA
[ 218.028338] mmc1: SDHCI at 0xc0208c00 irq 16 DMA
[ 218.028384] mmc2: SDHCI at 0xc0208800 irq 16 DMA
[ 218.028413] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 218.073581] sda1
[ 218.073690] sd 0:0:0:0: [sda] Attached SCSI disk
[ 218.276035] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 218.547093] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 218.657763] pccard: CardBus card inserted into slot 0
[ 218.658108] PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
[ 218.658116] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 218.658137] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 218.658143] ohci_hcd 0000:07:00.0: OHCI Host Controller
[ 218.658169] ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
[ 218.658188] ohci_hcd 0000:07:00.0: irq 16, io mem 0x58000000
[ 218.658284] MC'97 1 converters and GPIO not ready (0xff00)
[ 218.682155] Real Time Clock Driver v1.12ac
[ 218.683267] input: PC Speaker as /class/input/input3
[ 219.219490] usb usb4: configuration #1 chosen from 1 choice
[ 219.219518] hub 4-0:1.0: USB hub found
[ 219.219533] hub 4-0:1.0: 2 ports detected
[ 219.502355] irda_init()
[ 219.502374] NET: Registered protocol family 23
[ 219.526228] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
[ 219.526265] nsc-ircc, chip->init
[ 219.526280] nsc-ircc, Found chip at base=0x02e
[ 219.526323] nsc-ircc, driver loaded (Dag Brattli)
[ 219.526328] nsc_ircc_open(), can't get iobase of 0x2f8
[ 219.526376] nsc-ircc, Found chip at base=0x02e
[ 219.526418] nsc-ircc, driver loaded (Dag Brattli)
[ 219.526420] nsc_ircc_open(), can't get iobase of 0x2f8
[ 219.526654] pnp: Device 00:0a disabled.
[ 219.732246] PCI: Enabling device 0000:07:00.2 (0000 -> 0002)
[ 219.732256] ACPI: PCI Interrupt 0000:07:00.2[A] -> GSI 20 (level, low) -> IRQ 16
[ 219.732279] PCI: Setting latency timer of device 0000:07:00.2 to 64
[ 219.732284] ehci_hcd 0000:07:00.2: EHCI Host Controller
[ 219.732306] ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 5
[ 219.756077] ehci_hcd 0000:07:00.2: irq 16, io mem 0x58001000
[ 219.756098] ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 219.756207] usb usb5: configuration #1 chosen from 1 choice
[ 219.756233] hub 5-0:1.0: USB hub found
[ 219.756240] hub 5-0:1.0: 2 ports detected
[ 220.561954] cs: IO port probe 0x100-0x3af: clean.
[ 220.564499] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 220.565511] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[ 220.566369] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 220.567273] cs: IO port probe 0xa00-0xaff: clean.
[ 222.352033] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 222.567818] usb 4-1: configuration #1 chosen from 1 choice
[ 222.570815] scsi1 : SCSI emulation for USB Mass Storage devices
[ 222.570978] usb-storage: device found at 2
[ 222.570980] usb-storage: waiting for device to settle before scanning
[ 223.574488] lp: driver loaded but no devices found
[ 223.797784] Adding 899600k swap on /dev/hda6. Priority:-1 extents:1 across:899600k
[ 225.766087] EXT3 FS on hda3, internal journal
[ 227.561749] usb-storage: device scan complete
[ 227.571730] scsi 1:0:0:0: CD-ROM GT HSDPA Modem 3.00 PQ: 0 ANSI: 2
[ 227.581947] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 227.711486] sr0: scsi-1 drive
[ 227.711729] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 236.762032] ttyS1: LSR safety check engaged!
[ 236.762090] ttyS1: LSR safety check engaged!
[ 236.762635] ttyS1: LSR safety check engaged!
[ 238.620724] DLM (built Oct 14 2007 22:37:38) installed
[ 238.786552] GFS2 (built Oct 14 2007 22:38:13) installed
[ 238.790941] Lock_DLM (built Oct 14 2007 22:38:33) installed
[ 238.976469] NET: Registered protocol family 10
[ 238.976564] lo: Disabled Privacy Extensions
[ 251.702847] SCTP: Hash tables configured (established 65536 bind 65536)
[ 251.911625] Module sctp cannot be unloaded due to unsafe usage in /build/buildd/linux-source-2.6.22-2.6.22/net/sctp/protocol.c:1179
[ 255.048690] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 255.048927] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 255.807819] ACPI: ACPI Dock Station Driver
[ 256.423301] ACPI: AC Adapter [ADP1] (on-line)
[ 256.571811] input: Power Button (FF) as /class/input/input4
[ 256.575626] ACPI: Power Button (FF) [PWRF]
[ 256.606983] input: Lid Switch as /class/input/input5
[ 256.607214] ACPI: Lid Switch [LID0]
[ 256.622964] input: Sleep Button (CM) as /class/input/input6
[ 256.623200] ACPI: Sleep Button (CM) [SLPB]
[ 261.301340] ACPI: Battery Slot [BAT0] (battery present)
[ 263.442249] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3100+ processors (version 2.00.00)
[ 263.442283] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
[ 263.442285] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
[ 263.442288] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13
[ 269.245663] ttyS1: LSR safety check engaged!
[ 269.296742] r8169: eth0: link down
[ 269.297152] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 269.398488] capifs: Rev 1.1.2.3
[ 269.492025] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 270.530994] ppdev: user-space parallel port driver
[ 271.603766] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 271.891877] apm: BIOS not found.
[ 279.681410] nbd: registered device at major 43
[ 281.605037] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 282.047869] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 282.147406] NFSD: starting 90-second grace period
[ 284.035342] Capability LSM initialized
[ 285.524350] Bluetooth: Core ver 2.11
[ 285.524456] NET: Registered protocol family 31
[ 285.524458] Bluetooth: HCI device and connection manager initialized
[ 285.524461] Bluetooth: HCI socket layer initialized
[ 285.611238] Bluetooth: L2CAP ver 2.8
[ 285.611243] Bluetooth: L2CAP socket layer initialized
[ 285.615744] Bluetooth: RFCOMM socket layer initialized
[ 285.615828] Bluetooth: RFCOMM TTY layer initialized
[ 285.615831] Bluetooth: RFCOMM ver 1.8
[ 260.272000] Marking TSC unstable due to: cpufreq changes.
[ 260.276000] Time: acpi_pm clocksource has been installed.
[ 260.620000] Clocksource tsc unstable (delta = -194499879 ns)
[ 260.712000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 265.748000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 265.756000] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[ 265.756000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 265.784000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 23
[ 267.888000] [fglrx] total GART = 130023424
[ 267.888000] [fglrx] free GART = 114032640
[ 267.888000] [fglrx] max single GART = 114032640
[ 267.888000] [fglrx] total LFB = 134086656
[ 267.888000] [fglrx] free LFB = 119697408
[ 267.888000] [fglrx] max single LFB = 119697408
[ 267.888000] [fglrx] total Inv = 0
[ 267.888000] [fglrx] free Inv = 0
[ 267.888000] [fglrx] max single Inv = 0
[ 267.888000] [fglrx] total TIM = 0
[ 282.836000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 284.800000] UDF-fs: No VRS found
[ 284.920000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 284.984000] ISOFS: changing to secondary root
[ 304.984000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 309.784000] APIC error on CPU0: 00(40)
[ 327.064000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 349.128000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 353.116000] usb 3-1: USB disconnect, address 2
[ 364.984000] usb 3-1: new high speed USB device using ehci_hcd and address 4
[ 365.116000] usb 3-1: configuration #1 chosen from 1 choice
[ 365.120000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 365.120000] usb-storage: device found at 4
[ 365.120000] usb-storage: waiting for device to settle before scanning
[ 369.300000] usb 3-1: USB disconnect, address 4
[ 371.208000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 389.900000] usb 3-1: new high speed USB device using ehci_hcd and address 5
[ 390.032000] usb 3-1: configuration #1 chosen from 1 choice
[ 390.112000] scsi3 : SCSI emulation for USB Mass Storage devices
[ 390.112000] usb-storage: device found at 5
[ 390.112000] usb-storage: waiting for device to settle before scanning
[ 395.112000] usb-storage: device scan complete
[ 395.112000] scsi 3:0:0:0: Direct-Access FUJITSU MHW2120BH PQ: 0 ANSI: 2
[ 395.136000] sd 3:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 395.140000] sd 3:0:0:0: [sda] Write Protect is off
[ 395.140000] sd 3:0:0:0: [sda] Mode Sense: 38 00 00 00
[ 395.140000] sd 3:0:0:0: [sda] Assuming drive cache: write through
[ 395.160000] sd 3:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 395.164000] sd 3:0:0:0: [sda] Write Protect is off
[ 395.164000] sd 3:0:0:0: [sda] Mode Sense: 38 00 00 00
[ 395.164000] sd 3:0:0:0: [sda] Assuming drive cache: write through
[ 395.164000] sda: sda1
[ 395.248000] sd 3:0:0:0: [sda] Attached SCSI disk
[ 395.248000] sd 3:0:0:0: Attached scsi generic sg0 type 0
|
HELP PLASEE.... |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
|
|
|
|
|
FAQ
Search
Register
Log in
